1, the best maintenance method is silver wear every day, because the human bodycan produce the natural oils and fats moist luster. Jewelry equipment

2, do not wear silver other precious metals also wear jewelry, so as to avoid collision deformation or abrasion.

3, keep the silver dry, do not wear the swimming, away from the hot springs and the sea. When not in use a tissue or cotton cloth to wipe the surface, clear water and dirt, it will be placed in sealed bags or boxes, avoid contact with air.

4, if found signs of silver change yellow, the most easy to use toothpaste with light wash the surface of the water. Or use a small brush clean silver jewelry jewelry slits,then rub silver cloth graze the surface, we can immediately restore the original beautiful decoration. Jewelry equipment (if you use rub silver cloth to restore about eight or nine into a silvery white, do not use wiping silver milk and wash water,because they are corrosive, some silver jewelry will be more easy to turn yellowafter, the use of these products. In addition, rub silver cloth containing silvercomponent maintenance, do not wash)

5, silver yellow too serious, wash with water immersion time should not be too long,generally a few seconds, Shimizu Shirai take out immediately after use, and then dry with tissue paper.

6, if use wiping silver cloth to restore about eighty percent of the silvery white, need not use wiping silver milk and wash water, jewelry equipment because theseproducts have a certain corrosive, silver in the use of these products, will be more easy to turn yellow. Wipes the silver cloth containing silver and maintenance components, can not be washed.

7, if not following the usual wear silver in the processing and collection, they are likely to make silver black. Then you should use a small brush to clean jewelry jewelry slits, and then wipe silver milk a drop in surface paper, the silver surface ofthe black oxide wipe, and then wipe silver jewelry cloth to restore the original light.We must remember that after doing daily general maintenance of the jewelry equipment, avoid again black silver, silver in many times after dark is difficult toclean the white.

These are some of the basic considerations, again the following detailsmaintenance method about electroplating and not plating silver.

Silver easy oxidation is the flaw of yoga in it, and make the consumer and producerheadache. Jewelry equipment at present domestic market common silver surface treatment measures have further oxidation, electroplating, and untreated etc..

Further oxidation and untreated is to make full use of the characteristics of the silver oxide black, using oxidant deepen silver surface oxidation, or use silver surface natural oxidation, the effect more rich color and mechanism in the silver jewelry, make into flaws Yu, is leveraging the power of the law.

But the real method of preventing oxidation of silver jewelry is plated surface, the most common silver, rhodium, palladium plating etc..

One must first identify whether there electroplating (silver is generally divided intoelectroplated and no plating):

Electroplating silver jewelry, the inner layer for the silver, the surface do currenttreatment; electroplating in general is divided into power of gold and platinum;identification method of electroplating the surface sheen is the pure silver for light,like a mirror, reflecting the effect of good, also is not easy oxidation (as the plating thickness and determine the oxidation time). Electroless silver jewelry, very easy forvulcanization and lose luster, jewelry equipment (sulfur dioxide in the air of sulfur and silver to produce chemical reaction to form a layer of silver sulfide on silver jewelry to cut open after Apple will turn black.).

Simple treatment of electroplating silver jewelry is as follows:

1, the first to a nearby pharmacy or pharmacy to buy a pack of alum;

2, then you have to wear the silver jewelry with water 10:: the proportion of alum 1boiled in water (water must be boiling);

3, remove the silver jewelry into cold water to soft brush jewelry equipment (such as: toothbrush) with toothpaste or laundry off cleansing milk or salad;

4, to blow dry, then wipe bright as new.

The above can be processed by plating silver species:

A. Necklace (thickness can)

B. Pendant

C. ring (there are no gem can)

D. bracelet, bracelet (thickness can)