A tooth insert
   The process is embedded with metal teeth tight gem approach. Can be further divided into the prong setting and straight teeth inlay .
   1 ) prong setting : the traditional method of teeth inlaid mosaic . The process is to bend the metal tooth gems direction "seize " gems. Mainly used for arc -shaped , square, trapezoid , random -shaped gems and jade inlay . This is a mosaic of the most common and relatively simple operation of a process

. Was divided into two single grain inserts and inserts group , that is, only a single grain on the tray inlaid parquet grain larger stones; to set off the main stone and reflect the brilliance and value. Prong law in accordance with the number of claws into two claws , claw , four- and six- claw claws ; according to the shape of the claw can be divided into triangular claw , paw round , square jaw ,

Corners claw for claw ( sister claw ) sharp claws, claws , etc. with the type . Such as the popular "six claw crown" is the use of claw -type diamond ring inlaid mosaic law . Six long claws like lumbar triangle diamond crown will hold up high , the light from the surrounding incident and refracted diamond , diamonds seem crystal clear

, Noble and beautiful . When multi- prong setting stones inlaid mosaic deputy general first stone , and then the main stone inlay . Vice stone multi- faceted type of round diamond pieces .

2 ) straight teeth inlaid : inlaid mosaic of modern tooth type , metal teeth in the precious stone , gemstone direction not to bend , but in a car fitted inside the tooth groove card, the gem stuck. Mainly used for round diamond -shaped, oval -shaped faceted gemstone inlay. Depending on the number of metal tipped

Different , can be divided into two teeth tooth inlay inlay , three teeth inserts , four- tooth inserts , multi-tooth inserts , etc., commonly four-tooth inlay ; addition , depending on the shape of the teeth inserts , inserts can be divided into scalloped , square teeth inserts , V -shaped tooth inserts , etc.
Teeth inlaid mosaic method is an outstanding gem , jewel sufficiently exposed to allow more light to penetrate into the stones, gems increase fire color , is more suitable for transparent gemstone mosaic, such as diamond, ruby, sapphire , tourmaline , aquamarine , emeralds , etc. Single tooth jewelry inlaid style

Generally small and show cause Athens , lively and vibrant , more suitable for young women to wear.

Pros: inlaid firmly. Triangles and diamonds claw fire color combination of more drilling large .
Disadvantages: Some heart-shaped claw will hook clothes, or rower .
Tooth -setting considerations:

   Inlaid stones are mainly divided into two categories faceted gem stones and plain . Since faceted gems ( such as ruby , sapphire , emerald, amethyst , etc. ) tend to be brittle , so often need to play when the bayonet on the claw inlay , so the package insert live bayonet waist or top faceted gem , ensuring prison

Solid and beautiful ; plain stones inlaid generally do not need punch mouth , will punch the mouth only a thin plain inlaid stones, gems thin edge protection. Faceted gem claws generally circular , and plain treasure claws generally oblate ( or semicircle ) type . Main stone mosaic

The key is the jewel in the waist and inserts fit the mouth , and the mouth of the inlay should just be able to accommodate the height of waist-high stones .

The main drawback Prong are the following :

( 1 ) open at the end : that exposed faceted gem pavilion

( 2 ) exposed edge: jewel mouth exposed

( 3 ) Broadside : also known as wearing a hat , means gemstone inlaid waist larger than the mouth , mouth curved claws can easily damage gems

( 4 ) leaks : Gem waist less than rabbet

These defects are usually due to the production department rabbet cut standard or non-standard jewel cause .

2 , package inserts

Package inserts also known Bezel , it is a gem craft circled all around metal edge , and more for some of the larger stones, especially the arch of stones, gems because of the larger arch with Prong process is not easy to be anchored , and long claws and affect the overall appearance . Timeless classic

The base will attract people’s attention to the gems.
Pros: Visually very insecure , changing styles ,
Disadvantages: This method is not significant diamond inlay .

3 , forcing inlaid parquet force , also known as track inserts , clip inlay or wall inserts , inserts it in the mouth of a slot car side , the precious stones into place in the slot and firmly suppress a mosaic approach . Vice upscale jewelry inlaid stone often use this method. In addition some of the square, trapezoid diamonds inlaid with forced mosaic effect method

Fruit is excellent. This base with 65-95 pounds of pressure seize precious stones, gems like people feel hovering in the air.
Advantages: Diamond looks to show the greatest degree .
Disadvantages: not strong enough .

4 , Italy inlay ( inlay nausea )

Is extruded in a rabbet edge technology around metal edge and hold gems . This setting techniques used for pellets gems.

5 , Australia inlay

Rabbet edge in a process of several smiling extruded metal claw and hold the gemstones. This method has beautiful inlaid package inserts and Italian inlay , gems visually without significantly smaller, and more for pellets gems.

6 , Plum inserts

   This way is very special, also known as the "six inlay surrounded a " high points and low plum plum two , except that the main stone in stone above the deputy or below the Girdle , inlaid diamond pavilion high plum slot car needs this the basic principle of using the colors of the mosaic approach is at the same angle around six diamond grains

Balanced use of the waist or below the waist force fixed in the middle of a grain of the main stone , six diamonds fixed with a metal claw , claw of two adjacent diamonds , there are seven whole inlaid gemstones 6 claws , in the middle of a diamond without any metal prongs . This approach greatly extended inlaid with diamonds

Light, make a small seven diamonds due to the integration of the visual boundaries seem much larger , like a diamond . This process makes up a large diamond scarcity of regret, but also relatively low-cost large diamond jewelry making visual effects possible. But this relatively Prong setting techniques , in

Firmness on much worse , because each diamond is by extrusion pressure combined with each other more easily loosen and fall off. To be honest , the owner is not very recommended this mosaic method Oh, nice but firm although it is not enough ~ ~ ~ Of course, if not daily wear , it is not

What’s the problem ! Simply select the appropriate trusted jeweler diamonds provide the finished product, the degree of wear firm mosaic is to meet demand !

7 , the combination of inserts

Refers in the same gemstone studded collection of different mosaic . Can be embedded in both the main stone inlaid teeth , but also package inserts , such as heart-shaped , teardrop-shaped gem mosaic , using the package inserts inlaid teeth angle, the rear is fitted with teeth inlaid ; inserts can also be in the group of appeared tooth nail set

Plus slot inserts and other combinations . Combination of traditional mosaic inlay can be informal format , changing mosaic form , gives a new and unique feeling.
   8 , plug inserts
Mainly for the pearl inlay , metal craft in a stone bowl dish middle , extending a vertical metal pins, metal pins inserted into holes drilled pearls , so live pearl inlay . Pearl inlay is inserted without any shelter , highlight the characteristics of pearl , diamond pieces inlaid in particular to the group

Contrast , the more "Gem " of the situation
Modern mosaic jewelry often diverse, as used in the ladder square diamond infinity package inserts ( Figure 13 ) , alternative metal inlay wax inlay wax process, etc. , but eventually, the basic process remains unchanged. And because the mosaic process of continuous innovation, which makes jewelry first

Jewelry market has more vigor and vitality .

8, the group set
   Small particles gem ( vice- stone ) mosaic method , according to the group inlaid mosaic can be divided into different slots inserts , inserts from nails , teeth and nail set aperture inserts and so on.
   1 ) nail set : nail jewelry inlaid mosaic is a typical method is mainly used for less than 3mm in diameter , or vice- stone mosaic stone , is to use a small nail gems gem fixed to the edge of the drill bit , used for group set Vice stone in the mosaic . Distribution arrangement varied , a common linear row

Column , face -shaped arrangement , regular arrangement , irregular arrangement . Based on the number of nails and nail set is divided into two , three nail set , four nail set and pavé . Nail row of stone inlay methods are linear, triangular, plum-shaped , rules and irregular group inlaid parquet and other groups , when the nail and nail gems inlaid mosaic mutual

With the way , can be divided into "three stone a nail ", "four stone a nail" ( plum nail ) "six stone a nail ," and so on. Nail set though complex, but fine chic. Seize every tiny metal hole jewel to become a fine base .

Advantages : Fine chic
Cons: not suitable for single diamonds.

Nail -setting can be divided into two inlaid parquet and nail from the nail version .

A. Nail version mosaic inlay is performed on the already good hole jewelry tray. Nail nails are generally inlaid version has passed from the version, produced a good cast , just press- nails, to complete the top bead .

B. Staple inserts are no nail holes in the bracket jewelry plane by the operator depending on the width of the bracket plane of the substrate , the thickness of the stone to determine the size and rockfall holes , and then crossed the row of stone , drilling, Finally, from nails to operate. Staple process is relatively complex.
Advantages : Fine chic
Cons: not suitable for single diamonds.

   2 ) Channel setting : the use of metal stuck in the slot -like inlaid gemstones Girdle method ends . According to the group can be fitted styles use round, square, rectangular, trapezoidal diamond pieces . Channel setting more prominent in the decorative lines , giving the noble, gorgeous feeling. Gem was set in two parallel

Shaped metal bar , clear and bright , without appearing obtrusive. Precious stones and metals emerged their different charm.

Pros: inlaid firmly. You can enjoy the side of the diamond.
Disadvantages: not significant drill .

   3 ) Column inlay
Belong retro style , slim metal bar will be separate for each jewel , gem side exposed part reflects the beautiful light .
Advantages : suitable for many micro- diamonds inlaid .
Cons: not suitable for single diamonds.
   4 ) Tooth Nail inlaid : inlaid is between the teeth and inlaid mosaic method from a nail between the two , the main use of existing small metal teeth near the roots to live gem inlay to the tooth -generation nail from the nail inlay effect same . Tooth nail from the nail parquet inlaid by hand to overcome the wrecking small enough plump , technology to

Seeking higher defect, but insets position and size are fixed , no nails, as random inserts , flexible.
   5 ) aperture inserts : also known as wiping inlay , barrel inserts , the process is similar to the package insert , gem stone deep into the annular metal bowl rim made of metal wrapped tightly embedded peripheral subsidence gem has a metal rim , as if the light an aura , named aperture inserts . Aperture inserts and teeth can be divided into light

Circle inlay, inlaid teeth aperture is at the edge of the metal ring , hand carved out of several small metal teeth to live gem inlay , inlaid aperture due to the presence of metal halo , giving the visual feel gems increased a lot, but there is a certain aura round decorative .

6 ) Micro Pave : micro inlay technique is a relatively new technology that is introduced from the United States a few years ago , is still relatively small jewelry company in China using this technology. Micro mosaic inlay technology is a kind of high demand, a relatively complex setting techniques , it also called micro- nail set

, As the name suggests , this nail -setting looks very small , usually need to use a magnifying glass to observe, after the stone bordered have a feeling afloat , is a manifestation of the diamond can be an excellent way to glory . Micro inlay technique which is basically the same technology with the nail set , all with small diamonds set into

However, many of the micro- inserts smaller than the nail set nail , diamonds inlaid with each other very closely , it is not obvious metal inlay surface micro pave looks full of diamonds. Micro Pave basically replace the traditional nail inlay, inlaid with micro inlay way out of the fine jewelry is much more than the nail inlay technology , because of the micro- inserts

Shovel was straight and smooth edges , nails relatively thin , clear and round . Jewelry Micro Pave devices include : microscopes, micro-setting machine, mold wax injection machine , reel beads machine , polishing machine , grinding play sets jewelry , jewelry they die sets , jewelry, micro setting machine parts and tools and other products.

Micro inlay technique is a very complex technology , the technology in the production of a very high technological requirements . Producers to use more skilled machines and tools , and jewelry processing steps to be very understanding , so that we can properly use the machine to produce better technology

Product .

    Group mostly with teeth inlaid parquet and package inserts conducted generally use package inserts or teeth inlaid mosaic master stone, inlaid mosaic to group vice stone ( diamond pieces ) phase contrast, if Zhongxingpengyue , more noble and gorgeous jewelry shows , grandeur of style. Modern treasure jewelry inlaid with a group set basic

, Especially in some high-end , expensive jewelry inlaid treasure , the group has become an essential part of the inlay .